dmesg - Intel 82540EM
Linux version 5.10.198-std-def-alt1 (builder@localhost.localdomain) (gcc-10 (GCC) 10.3.1 20210703 (ALT Sisyphus 10.3.1-alt2), GNU ld (GNU Binutils) 2.35.2.20210110) #1 SMP Wed Oct 11 00:33:51 UTC 2023
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Hypervisor detected: KVM
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 4201001, primary cpu clock
kvm-clock: using sched offset of 9191548596 cycles
clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
tsc: Detected 3600.002 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
Disabled
x86/PAT: MTRRs disabled, skipping PAT initialization too.
CPU MTRRs all blank - virtualized system.
x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
found SMP MP-table at [mem 0x0009fff0-0x0009ffff]
check: Scanning 1 areas for low memory corruption
RAMDISK: [mem 0x357c1000-0x36bd7fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
ACPI: XSDT 0x000000007FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 0x000000007FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 0x000000007FFF0620 002353 (v02 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 0x000000007FFF0200 000040
ACPI: FACS 0x000000007FFF0200 000040
ACPI: APIC 0x000000007FFF0240 00006C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 0x000000007FFF02B0 00036C (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Reserving FACP table memory at [mem 0x7fff00f0-0x7fff01e3]
ACPI: Reserving DSDT table memory at [mem 0x7fff0620-0x7fff2972]
ACPI: Reserving FACS table memory at [mem 0x7fff0200-0x7fff023f]
ACPI: Reserving FACS table memory at [mem 0x7fff0200-0x7fff023f]
ACPI: Reserving APIC table memory at [mem 0x7fff0240-0x7fff02ab]
ACPI: Reserving SSDT table memory at [mem 0x7fff02b0-0x7fff061b]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
NODE_DATA(0) allocated [mem 0x7ffce000-0x7ffeffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007ffeffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007ffeffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
On node 0 totalpages: 524174
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 520176 pages, LIFO batch:63
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone DMA32: 16 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on KVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288
pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
kvm-guest: PV spinlocks enabled
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)
Built 1 zonelists, mobility grouping on. Total pages: 515961
Policy zone: DMA32
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 1985452K/2096696K available (14344K kernel code, 2739K rwdata, 8336K rodata, 2912K init, 16784K bss, 110988K reserved, 0K cma-reserved)
Kernel/User page tables isolation: enabled
ftrace: allocating 40391 entries in 158 pages
ftrace: allocated 158 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200925
APIC: Switch to symmetric I/O mode setup
x2apic enabled
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e4559ce44, max_idle_ns: 440795364889 ns
Calibrating delay loop (skipped) preset value.. 7200.00 BogoMIPS (lpj=3600002)
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
RETBleed: Vulnerable
Speculative Store Bypass: Vulnerable
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Mitigation: Clear CPU buffers
SRBDS: Unknown: Dependent on hypervisor status
GDS: Unknown: Dependent on hypervisor status
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Freeing SMP alternatives memory: 36K
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AltHa disabled.
Kiosk: Netlink family registered.
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
smpboot: CPU0: Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xb)
Performance Events: unsupported p6 CPU model 158 no PMU driver, software events only.
rcu: Hierarchical SRCU implementation.
NMI watchdog: Perf NMI watchdog permanently disabled
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
kvm-clock: cpu 1, msr 4201041, secondary cpu clock
#2
kvm-clock: cpu 2, msr 4201081, secondary cpu clock
#3
kvm-clock: cpu 3, msr 42010c1, secondary cpu clock
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
----------------
| NMI testsuite:
--------------------
remote IPI: ok |
local IPI: ok |
--------------------
Good, all 2 testcases passed! |
---------------------------------
smpboot: Total of 4 processors activated (28800.01 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1715708832.764:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
Kprobes globally optimized
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 07
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:02.0: [15ad:0405] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [io 0xd010-0xd01f]
pci 0000:00:02.0: reg 0x14: [mem 0xe0000000-0xe3ffffff pref]
pci 0000:00:02.0: reg 0x18: [mem 0xf0000000-0xf01fffff]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0200000-0xf021ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd020-0xd027]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd040-0xd05f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
pci 0000:00:0b.0: reg 0x10: [mem 0xf0805000-0xf0805fff]
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 0x14: [io 0xd248-0xd24b]
pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 0x1c: [io 0xd258-0xd25b]
pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
clocksource: Switched to clocksource kvm-clock
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp: PnP ACPI: found 2 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfdffffff window]
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20572K
RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4559ce44, max_idle_ns: 440795364889 ns
clocksource: Switched to clocksource tsc
platform rtc_cmos: registered platform RTC device (no PNP device found)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=19 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler bfq registered
crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
crc32: self tests passed, processed 225944 bytes in 116281 nsec
crc32c: CRC_LE_BITS = 64
crc32c: self tests passed, processed 225944 bytes in 57920 nsec
crc32_combine: 8373 self tests passed
crc32c_combine: 8373 self tests passed
intel_idle: Please enable MWAIT in BIOS SETUP
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: setting system clock to 2024-05-14T17:47:03 UTC (1715708823)
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
intel_pstate: CPU model not supported
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Segment Routing with IPv6
RPL Segment Routing with IPv6
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1841795712, 8018170)->(1855971783, -6157901)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: f7b8d961a6a5ba66239e58633a5f234dbf16f3ba'
zswap: loaded using pool zstd/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2912K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 1904K
rodata_test: all tests were successful
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-std-def
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[drm] DMA map mode: Caching DMA mappings.
[drm] Capabilities:
[drm] Rect copy.
[drm] Cursor.
[drm] Cursor bypass.
[drm] Cursor bypass 2.
[drm] Alpha cursor.
[drm] Extended Fifo.
[drm] Pitchlock.
[drm] Irq mask.
[drm] GMR.
[drm] Traces.
[drm] GMR2.
[drm] Screen Object 2.
[drm] Command Buffers.
[drm] Max GMR ids is 8192
[drm] Max number of GMR pages is 1048576
[drm] Max dedicated hypervisor surface memory is 458752 kiB
[drm] Maximum display memory size is 65536 kiB
[drm] VRAM at 0xe0000000 size is 65536 kiB
[drm] MMIO at 0xf0000000 size is 2048 kiB
[TTM] Zone kernel: Available graphics memory: 1007602 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] Screen Objects Display Unit initialized
[drm] width 720
[drm] height 400
[drm] bpp 32
[drm] Fifo max 0x00200000 min 0x00001000 cap 0x00000355
[drm] Using command buffers with DMA pool.
[drm] Atomic: yes.
[drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
fbcon: svgadrmfb (fb0) is primary device
Console: switching to colour frame buffer device 100x37
[drm] Initialized vmwgfx 2.18.0 20200114 for 0000:00:02.0 on minor 0
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 4294965248 sectors, multi 128: LBA48
scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4294965248 512-byte logical blocks: (2.20 TB/2.00 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Image not found (code -22)
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
EXT4-fs (sda2): orphan cleanup on readonly fs
EXT4-fs (sda2): 27 orphan inodes deleted
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd v249.16-alt2 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected virtualization oracle.
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd-sysv-generator[2126]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[2126]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[2126]: SysV service '/etc/rc.d/init.d/cryptdisks.functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock → /run/cups/cups.sock; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/anacron.service:12: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /lib/systemd/system/anacron.service:13: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /lib/systemd/system/alteratord.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/alteratord/.socket → /run/alteratord/.socket; please update the unit file accordingly.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Created slice Slice /system/vconsole-setup-kludge.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Login Prompts.
systemd[1]: Reached target Preparation for Network.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote Encrypted Volumes.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module dm_mod...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module loop...
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Setup Virtual Console on tty1...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@loop.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module loop.
systemd[1]: Mounting Kernel Configuration File System...
device-mapper: uevent: version 1.0.3
fuse: init (API version 7.32)
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module dm_mod.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module efi_pstore.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
vboxguest: host-version: 7.0.12r159484 0x8000000f
vbg_heartbeat_init: Setting up heartbeat to trigger every 2000 milliseconds
input: VirtualBox mouse integration as /devices/pci0000:00/0000:00:04.0/input/input2
random: lvm: uninitialized urandom read (4 bytes read)
vboxguest: misc device minor 60, IRQ 20, I/O port d040, MMIO at 0x00000000f0400000 (size 0x0000000000400000)
EXT4-fs (sda2): re-mounted. Opts: (null)
systemd-journald[2141]: Received client request to flush runtime journal.
systemd-journald[2141]: File /var/log/journal/d4574c3fe2b0939cbbc19c64664397f5/system.journal corrupted or uncleanly shut down, renaming and replacing.
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3600001947 Hz
vboxdrv: Successfully loaded version 6.1.46 r158378 (interface 0x00320000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
random: crng init done
ACPI: AC Adapter [AC] (on-line)
piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
scsi host2: ahci
ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
e1000: Intel(R) PRO/1000 Network Driver
e1000: Copyright (c) 1999-2006 Intel Corporation.
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
ACPI: Sleep Button [SLPF]
input: PC Speaker as /devices/platform/pcspkr/input/input6
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input7
Adding 4029436k swap on /dev/sda1. Priority:-2 extents:1 across:4029436k FS
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
ata3: SATA link down (SStatus 0 SControl 300)
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.0: EHCI Host Controller
ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.0: irq 19, io mem 0xf0805000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 12 ports detected
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:f6:98:fc
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
e1000 0000:00:03.0 enp0s3: renamed from eth0
snd_intel8x0 0000:00:05.0: allow list rate for 1028:0177 is 48000
NET: Registered protocol family 42
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
NET: Registered protocol family 17
systemd-journald[2141]: File /var/log/journal/d4574c3fe2b0939cbbc19c64664397f5/user-500.journal corrupted or uncleanly shut down, renaming and replacing.
Service: Shared Clipboard
Service: Host Version Check
Service: Seamless
Service: Drag and Drop (DnD)
Service: Display SVGA X11
Worker loop running
Proxy window=10485761, root window=1330 ...
Started
6.1.46r158378
VMWARE's ctrl extension is available. Major Opcode is 128.
Found libXrandr 1.6
RRScreenChangeNotify event received
output[0] successfully configured
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
output[0] successfully configured
output[0] successfully configured
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
output[0] successfully configured
Monitor 0 (w,h)=(1920,977) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(1920,977) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(1920,977) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(1920,977) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
output[0] successfully configured
Monitor 0 (w,h)=(640,480) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(640,480) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(640,480) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(640,480) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
output[0] successfully configured
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
systemd-sysv-generator[3863]: SysV service '/etc/rc.d/init.d/apcupsd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[3863]: SysV service '/etc/rc.d/init.d/clock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[3863]: SysV service '/etc/rc.d/init.d/cryptdisks.functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
RRScreenChangeNotify event received
output[0] successfully configured
Monitor 0 (w,h)=(1920,977) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(1920,977) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(1920,977) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(1920,977) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
python2 (4159): drop_caches: 3
python2 (4159): drop_caches: 3
python2 (4176): drop_caches: 3
python2 (4176): drop_caches: 3
python2 (4189): drop_caches: 3
python2 (4189): drop_caches: 3
RRScreenChangeNotify event received
output[0] successfully configured
Monitor 0 (w,h)=(640,480) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(640,480) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(640,480) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(640,480) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
output[0] successfully configured
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS
RRScreenChangeNotify event received
Monitor 0 (w,h)=(958,968) (x,y)=(0,0)
Sending monitor positions (8 of them) to the host: VINF_SUCCESS